Remove the plugs with some vice-grips and then take a hammer and punch to put the new metal plugs in. From there, it is just a reverse procedure to get it all back together.
The other set will get you in the house and to the shower. Nothing in your car smells worst than gear lube! If you can work with the wear a pair of star wars empire at war nocd vinyl gloves (Saves time in cleaning under your nails)!
Then I disconnected the wiring harness for the lumbar support. Now you need to remove the seat from the seat belt rail. Take the 10mm wrench and remove the nut in the front of the rail.
Contributed by Matt Bobbitt Here is how I cahnged those 3 plugs Tools: 10mm wrench 8mm socket 10mm socket 13mm socket Phillips Screwdriver Flathead Screw driver This is for a Ranger Supercab, but should be similar with the explorers.
It looks like a over sized hand lotion pump with a small hose attached They are running around 12 on Ebay depending on the requirement of your car you will need 1 to 3 Qts of either 80-90w gear oil (lube) or 120W I recommend.
Available in 2 styles Choose SUV Know the History. Get a Free VIN Check. Was the car reported in an accident or damaged in a flood? Search Autocheck's extensive vehicle database to find out now.